We have in the offering Non Shrink Grout/ GP2 that is hydraulic cement grout that is a combination of portland cement, chemical additives and graded fillers. The graded fillers play an essential role as it ensures uniform and consistent free-flowing grout. This construction chemical does not shrink when hardened in many conditions. This is a ready to mix powder that just needs to be mixed with water for final use. Our Non Shrink Grout/ GP2 is highly efficient, durable, cost effective and helps in increasing volume over the time. It minimizes the demand for water, which ensures high early strength.
Features & Benefits of Non Shrink Grout/ GP2
- Dual Expansion: Expands in plastic state and after initial setting.
- Low water permeability: It is suitable to be used in tie rod holes grouting as it can excellently resist ingress of water.
- Pre packed: Mixing is done at the factory which prevents variations in onsite batch mixing.
- Free Flow: The grout reaches to all slots of the grouting area.
Areas of Application of Non Shrink Grout/ GP2
It can be used for many purposes, from machine foundation grouting, base plate grouting of heavy duty machines and grouting the tie rod holes/slots.
Method of Application:
Foundation surface: The substrate surface is cleaned and all oil, loose particles and grease are removed. The concrete surface must be cut back to a sound base in case of any defect. The dirt or debris from the holes and fixing pockets.
Mixing :- A mechanically powered grout mixer must be used to achieve best results. A heavy duty slow speed drill (400-500 rpm) fitted with a paddle is ideal in case up to 50kh quantities are to be used. Heavy duty mixer is used for larger quantities. The quantity of water to be added to 25 kg bad to get requisite consistency is mentioned below:
- Pourable : 4.125 litres
- Flowable : 4.500 litres
The accurately measured water content to be added into the mixer.
The grout must be mixed for 20 minutes under 300 C to gain complete benefit of the expansion process. When used as an underplate grout, MCON NSG 60 can be placed in thicknesses up to 70mm in a single use. Non Shrink Grout/ GP2 needs to be added with well graded silt free aggregate for thicker sections. Generally, a 10mm aggregate is ideal. 50 to 100 percent aggregate weight of GP2 can be added.
25 kgs. bags
- 10000 Per Week
- 1 Week
- Plastic bag
- All India
Gala-5, Kabra Stage, Bandivali Hill Road, Opposite Malkani Tower, Jogeshwari West, Mumbai Maharashtra India +918037401340